SOGO論壇

標題: [心得分享] HP ProLiant ML110 G5 Server 2003 升級 2008R2 [列印本頁]

作者: tsaidick    時間: 2014-12-14 12:13:06     標題: [心得分享] HP ProLiant ML110 G5 Server 2003 升級 2008R2

本帖最後由 tsaidick 於 2014-12-14 12:29 編輯



如果硬碟毀損 新購硬碟 建議 升級 server 2008 R2

Enabling SATA RAID functionality in the BIOS Setup Utility:

1. Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).

2. Go to the Advanced tab.

3. Enter the Advance Chipset Control.

4. Set up the SATA as Enable and the SATA RAID as Enable.

5. Press F10, Save and Exit.

6. Reboot the server.

7. During post, f8 will now show up for the embedded SATA setup.

Creating the RAID volume:

1. Enter the Array Configuration Utility.

2. Enter Create array.

3. Create the raid volume. Select the Hard Drives.

4. Choose RAID 1, and enter Array Label, Create RAID Via as Quick Init.

5. Exit the SATA setup.

附件: ML110.jpg (2014-12-14 12:12:00, 17.78 KB) / 下載次數 13
https://oursogo.com/forum.php?mod=attachment&aid=OTAzODQ3MHw4MTcxMWI1NHwxNzUzMjU4ODUyfDB8MA%3D%3D




歡迎光臨 SOGO論壇 (https://oursogo.com/) Powered by OURSOGO.COM